5.25" 2-Way In-Ceiling Speakers
|
|
By: Crestron
The World's Leader for Advanced Home, Campus & Building Control Automation Solutions
|
The product of expert Crestron ® audio engineering, Aspire speakers deliver high-end performance for demanding residential installations. Select materials and a refined appearance underscore the meticulous design behind each model. The result is a complete line of in-wall and in-ceiling speakers worthy of a place in every room of the finest custom home.
The Aspire line strikes a perfect balance between performance and price, delivering pristine, impactful sound quality, with minimal impact on your dةcor thanks to paintable zero-bezel grilles. Streamlined installation is facilitated through a three-point, spring-loaded toggle clamp mounting system optimized to minimize interference with obstructions within the ceiling space.
The Aspire-IC5 model provides a pair of 2-way in-ceiling loudspeakers featuring 5-1/4 inch woven poly-glass composite woofers for rich, impactful low end, and 1 inch advanced synthetic polymer dome tweeters for crisp, soaring highs. AspireIC5 offset post-mounting of the tweeters reduces midrange frequency response anomalies normally caused by interference between the woofer and the back of the tweeter. Precisely tuned 4th order crossovers ensure a full, warm and detailed response across the spectrum. Power handling is an impressive 100 Watts (program), with a wide frequency response from 55 Hz to 20 kHz ( ±3 dB).
→ For indoor use only
→ Dimensions shown are per speaker
→ Audiophile performance 2-way in-ceiling loudspeakers
→ 5.25" woven poly-glass composite woofers
→ 1" advanced synthetic polymer dome tweeters
→ 4th order crossovers
→ Steel composition woofer baskets
→ Vented pole pieces
→ Zero-bezel frameless steel grilles, paintable
→ Three-point spring-loaded toggle clamp mounting system
→ 100 Watts program power handling
→ 55Hz-20kHz frequency response
→ 8 Ohms nominal impedance
→ Sold in pairs
Woofer |
5.25 inch (134 mm) woven poly-glass composite w/rubber surround, vented pole piece & steel basket |
Tweeter |
0.98 inch (25 mm) advanced synthetic polymer dome, ferrofluid cooling, offset post-mounted |
Crossover |
4th order |
Crossover Frequency |
2.5 kHz |
Impedance |
8 Ohms nominal |
Frequency Response |
55 Hz to 20 kHz (±3 dB) |
Frequency Range |
45 Hz to 20 kHz (-10 dB) |
Power Handling |
100 Watts program |
Sensitivity |
88 dB @ 1W/1m |
Input |
(2) spring terminals; Maximum Wire Size: 10 AWG |
Temperature |
41° to 104°F (5° to 40°C) |
Humidity |
10% to 90% RH (non-condensing) |
Baffle |
ABS plastic, black |
Grille |
Steel with textured finish, paintable, magnetically-held "zero-bezel" frameless |
Mounting |
Flush ceiling mount using 3 integral spring-loaded toggle clamps, 1.35 in (34 mm) maximum surface thickness, 3.79 in (97 mm) minimum mounting depth, 7.4 in (188 mm) diameter recommended cutout |
Diameter |
8.30 in (211 mm) |
Depth |
3.98 in (101 mm) |
Weight |
3.72 lb (1.69 kg) per speaker |
© 1996 - 2024 | All Rights Reserved
Audio Video Supply Inc.
4542 Ruffner St. Suite 220
San Diego, CA 92111
Prices and specifications subject to change without notice.